Laboratory of Microalgal Biotechnology

Equipment

Spectrometer – iCAP 6500 Duo ICP OS, Thermo Scientific

  • analysis of major and trace elements
  • high performance CID detector, wavelength range of 166 – 847 nm
  • simultaneous analysis of multiple elements with detection limits at the ppb level

Mineralizer – Berghof Speedwave

  • sample preparation device for elemental composition determinations
  • mineralization of up to 12 samples simultaneously
  • mineralization of solid or liquid samples with concentrated acids under increased pressure and in the presence of microwaves

Photobioreactors – BIOSTAT®PBR 2S, Sartorius Stedim Systems GmbH

  • for the culture of unicellular plant organisms
  • control of parameters (including temperature, pH)

Clark’s oxygen electrode – Oxytherm+ Control Unit, Hansatech Instruments Ltd

  • provides measurement of oxygen in a wide range of liquid phase samples

Climatic Chambers With Phytotron System – ALGAETRON AG230, Photon Systems Instruments

  • allows to provide optimal growth conditions for microalgae, cyanobacteria or plant tissue culture on Petri dishes or in Erlenmayer flasks
  • 3 shaker shelves with a capacity of 3.5 kg
  • temperature control in the range of 15-45°C
  • illumination intensity of the upper panel up to 500 µmol(photon)/m2.s (at a distance of 30 cm from the light source) and on the two lower panels up to 100 µmol(photon)/m2.s (at 30 cm from the light source)
  • possibility to connect the GMS 150 gas mixing system

Gas Mixing System GMS 150, Photon Systems Instruments

  • automatic mixing of up to 2 gases
  • independent regulation of each gas component

Spectrophotometer – DR 3900, Hach

  • absorbance measurement in the wavelength range 320 – 1100 nm
  • operation on commercial test kits

Inverted optical microscope – CKX41, Olympus

  • number of lenses: 4
  • scale: 10, 20, 40, 60

Calorimeter –AC600, LECO

  • analysis of organic and inorganic materials such as solid fuels, liquid fuels, biomass, food products
  • nominal weight approx. 1 g
  • water system with temperature stabilization

Ultrasonic disintegrator – VCX500, SONICS

  • sonicator with a maximum power of 500 watts
  • tip diameter 19 mm
  • sample size from 0.2 ml to 1 L
  • vibration amplitude adjustable from 20 to 100 % amplitude

Analytical balance AS 62.5Y included with antistatic ionizer DJ-05, RADWAG

  • load range: 0.001 – 62 g
  • reading accuracy 0.01 mg
  • tare range -62 g
  • leveling system: semi-automatic – LevelSENSING
  • ionizer removes excess ions from the balance, balance elements and its surroundings

Moisture analyzer – HG63, METTLER TOLEDO

  • enabling the determination of moisture content using the loss after drying method
  • weight measurement range: 0.001-61g
  • accuracy of the balance reading: 1 mg

Vacuum evaporators with vacuum pumps – Hei-VAP Advantage and Hei-VAP Precision, Heidolph

  • Hei-VAP water baths allow temperatures of 210 °C to be reached
  • programming and adjustment of heating speed and temperature

Kjeldahl complete– behr Labor-Technik

  • system for determination of total nitrogen according to Kjeldahl method
  • 12-station digester for standard 250ml vessel volumes
  • fully automated steam distiller
  • detection limit of 0.2 mg N

Determination kit – BOD OxiTop®-i IS 12, Xylem Analytics Germany (WTW)

  • respirometric measurement system for determining biological oxygen demand (BOD)

Muffle furnace – SNOL 30/1100 LSF01 with E5CC controller, SNOL

  • determination of organic dry matter content
  • temperature control range: 50-1100 °C
  • chamber capacity: 30L

Thermostatic cabinet – ST 2, POL-EKO

  • temperature range 3- 40°C
  • usable volume of the chamber 122 liters
  • forced temperature circulation
  • possibility to insert a shaker with a maximum shelf load of 10kg

Laboratory dryer with forced air circulation – VENTICELL, Binder FD 53

  • temperature range from 5°C above ambient temperature to 100 °C and 300 °C (Binder FD 53)
  • digital controller with integrated timer from 0 to 99 h 59 min or continuous operation

Laboratory incubator – Q-CELL 60, Pol-Lab and C-65G Wamed

  • incubation of the test material at a precisely defined temperature with an accuracy of 0.1ºC
  • possibility of continuous operation up to 31 days temperature range +3ºC to +40ºC

Compact microbiological incubator – Heratherm IMC18, Thermo Scientific

  • provides optimal incubation of microbiological samples
  • volume: 18 l
  • forced air circulation
  • temperature range: 17° to 40°C

Thermoblock – RD 125, Lovibond

  • incubation of biological, biochemical and chemical material
  • the device operates at three temperatures (100 / 120 / 150 °C) and three times (30 / 60 / 120 minutes)

Thermoblock with two independently adjustable blocks – NANOCOLOR VARIO 3, Macherey-Nagel

  • incubation of biological, biochemical and chemical material
  • possibility of simultaneous incubation of 24 samples in 16 mm diameter tubes
  • heating range from 40 to 160°C with an accuracy of ± 1°C
  • incubation time from 1 min to 9 h 59 min

Water bath – SWB, Laboplay

  • water bath with shaker
  • operating range +5°C above ambient temperature to +100°C
  • equipped with a stand for test tubes

Shaker with incubator- Unimax 1010, Heidolph

  • orbital shaker with speed control 30-500 rpm
  • maximum load of 5 kg.
  • working time: continuous or from 1 to 999 minutes
  • operation in the temperature range from 5°C above ambient temperature to 65°C

Centrifuge – ROTANTA 460 RS, Hettich

  • separation of biological mixtures, separation of biomass, sludge
  • working temperature range: -20 to +90 °C
  • maximum speed 15 000 RPM (rotor 15-2ml)
  • maximum rotation 9 500 RPM (rotor 15-50ml)

Laboratory water purification system – XIO P, SolPure

  • constant quality of produced water (resistivity of the order of 18.2 MΩ/cm), treatment of water at a flow rate of up to 2 l/min
  • conductivity of the obtained water 0.055 µS/cm

Autoclaves – Tuttnauer 110L and 52 L

  • automatic steam sterilization process
  • 4 programs designed to sterilize liquids, instruments and wastes
  • constant monitoring of temperature and sterilization time
X